© 2026 MK Material Oto. San. ve Tic. Ltd. Şti.
Manufacturer and supplier of gas springs and fastening components. Operating internationally since 2016, backed by over 20 years of industry experience.
CONTACT
I.O.S.B. Eskoop. San. Sit. C6 Blok No: 291
Başakşehir / Istanbul / TÜRKİYE
MK MATERIAL
Gas Springs & End Fittings
Eyelets for Gas Springs
Metal Eyelets
Zamak Eyelets
Plastic Eyelets
MK Gas Springs supplies metal eyelets, Zamak eyelets and plastic eyelets for gas spring assemblies. The internal thread connects the eyelet to the threaded end of the gas spring, while the mounting hole connects to a compatible pin or bolt.
The range includes different body shapes, internal thread sizes and mounting-hole diameters. Metal eyelets in the EY range, die-cast Zamak eyelets in the ZK range and the PL8 plastic eyelet provide different dimensional and material options. Detailed specifications and technical drawings are available on the individual product pages.
Metal, Zamak and Plastic Eyelets
Metal eyelets in the EY range are available in different body shapes and installation dimensions. The standard execution uses 11SMnPb30 steel with a Zn/White zinc-plated finish. Other materials, coatings and dimensions can be assessed according to the customer’s specification or application requirements. Available variants and manufacturing conditions are described on the individual product pages.
Zamak eyelets in the ZK range are die-cast from Zamak 5 zinc alloy and supplied without an additional coating as standard. The casting mould defines the external shape and dimensions of each body. Alternative thread sizes and mounting-hole diameters can be assessed within the existing body dimensions, subject to confirmation of the required specification.
The PL8 plastic eyelet has a PA66 GF30 body — polyamide 66 reinforced with 30% glass fibre — and a brass threaded insert. The two listed variants have an M6 internal thread and mounting-hole diameters of 8.2 or 10.2 mm. PL8 is supplied in the dimensions shown in its dimensional table and technical drawings.
When selecting an eyelet, check the internal thread size, mounting-hole diameter, installation dimensions and required range of movement. The mounting-hole diameter must be matched to the pin or bolt diameter, taking account of the required clearance and tolerances. The eyelet body must have sufficient clearance throughout the full range of movement so that it does not interfere with surrounding components or restrict the movement of the assembly.
Detailed dimensions, materials, thread sizes, technical drawings and available variants can be found on the individual product pages.
Need Help Selecting the Right Eyelet?
If you are unsure which eyelet is suitable for your application, send us the internal thread size, mounting-hole diameter, installation dimensions and quantity. Please describe the components to be connected and the required range of movement. If available, include the dimensions of the mating pin or bolt.
For an EY eyelet with different material, coating or dimensional requirements, please provide the required specification. For Zamak eyelets, alternative thread sizes and mounting-hole diameters can be assessed within the existing body dimensions. PL8 is available in the listed dimensional variants.
Send us a drawing, photo, dimensions and application requirements. Our team can help you select a suitable eyelet and check compatibility with the mating components and the available installation space.