© 2026 MK Material Oto. San. ve Tic. Ltd. Şti.
Manufacturer and supplier of gas springs and fastening components. Operating internationally since 2016, backed by over 20 years of industry experience.
CONTACT
I.O.S.B. Eskoop. San. Sit. C6 Blok No: 291
Başakşehir / Istanbul / TÜRKİYE
MK MATERIAL
Gas Springs & End Fittings
Spherical Rod End with Male Thread – Type DG2
DG2 is a spherical rod end with a male thread, used in mechanical linkages and other mechanical connections requiring angular movement. It incorporates a spherical inner ring with a through bore for connection to a compatible pin or bolt.
The male thread allows the rod end to be screwed into a compatible female-threaded component, while the spherical inner ring allows angular movement within the limits of the assembled connection. When selecting a rod end, check that its mounting dimensions are compatible with the mating components and allow the required movement.
The DG2 range includes bore diameters from 5 to 14 mm and external threads from M5 to M14. Each size is available in version N with a grease nipple or maintenance-free version W with PTFE. The corresponding technical drawings show the dimensions and construction of each variant.
| Code |
Grease Nipple |
Drawing |
Bore (d) |
l |
Thread (m) |
t |
|---|---|---|---|---|---|---|
| DG20533M5N |
Yes |
5 |
33 |
M5 |
6 |
|
| DG20533M5W |
No |
5 |
33 |
M5 |
6 |
|
| DG20636M6N |
Yes |
6 |
36 |
M6 |
6.75 |
|
| DG20636M6W |
No |
6 |
36 |
M6 |
6.75 |
|
| DG20842M8N |
Yes |
8 |
42 |
M8 |
9 |
|
| DG20842M8W |
No |
8 |
42 |
M8 |
9 |
|
| DG21048M10N |
Yes |
10 |
48 |
M10 |
10.5 |
|
| DG21048M10W |
No |
10 |
48 |
M10 |
10.5 |
|
| DG21254M12N |
Yes |
12 |
54 |
M12 |
12 |
|
| DG21254M12W |
No |
12 |
54 |
M12 |
12 |
|
| DG21460M14N |
Yes |
14 |
60 |
M14 |
13.5 |
|
| DG21460M14W |
No |
14 |
60 |
M14 |
13.5 |
All dimensions in mm. Version N is fitted with a grease nipple and requires regular lubrication. Version W uses PTFE, is supplied without a grease nipple and does not require relubrication. Dimension l is measured from the centre of the mounting bore to the end of the threaded shank. Refer to the corresponding technical drawing for the dimensions of the selected variant, including the threaded shank length.
DG2 Spherical Rod End – Dimensions and Variants
The dimensional table lists the available DG2 product codes, grease nipple availability, bore diameters, external thread sizes and installation dimensions. The corresponding technical drawings show the dimensions and construction of each variant.
When selecting a variant, check the bore diameter (d), external thread size (m) and installation dimension (l). Dimension l is measured from the centre of the mounting bore to the end of the threaded shank. The bore must match the mounting pin or bolt, and the external thread must match the internal thread of the mating component. Also check the threaded shank length shown in the corresponding drawing.
Check the available clearance and required range of angular movement. For version N, allow access to the grease nipple for lubrication. Refer to the drawing for the selected product code to check the detailed installation dimensions.
Materials and Available Versions
DG2 version N uses steel and brass components and is fitted with a grease nipple. This version requires regular lubrication.
DG2 version W uses steel and PTFE and is supplied without a grease nipple. This version is maintenance-free and does not require relubrication.
The final letter in the product code identifies the version: N or W. Select the version according to the operating conditions and maintenance requirements. Please refer to the dimensional table and the corresponding drawings for the available sizes.
Need Help Selecting the Right DG2 Rod End?
If you are unsure which DG2 variant is suitable for your application, send us the required bore diameter, external thread size, installation dimensions and quantity. Please indicate whether you need version N with a grease nipple or maintenance-free version W with PTFE. If you are unsure which version to choose, describe the operating conditions and whether regular lubrication is possible.
Send us a drawing, photo, dimensions and application requirements. Our team can help you select a suitable DG2 size and version N or W, and check compatibility with the mating components and available installation space.