© 2026 MK Material Oto. San. ve Tic. Ltd. Şti.
Manufacturer and supplier of gas springs and fastening components. Operating internationally since 2016, backed by over 20 years of industry experience.
CONTACT
I.O.S.B. Eskoop. San. Sit. C6 Blok No: 291
Başakşehir / Istanbul / TÜRKİYE
MK MATERIAL
Gas Springs & End Fittings
Clevis with Male Thread – Type CV2, Similar to DIN 71752
CV2 is a range of clevises with male thread, similar to DIN 71752, designed for detachable pivot connections in mechanical linkages, actuators and other mechanical applications. The integral threaded stud allows the clevis to be screwed directly into a compatible female-threaded component, while the forked end connects to the mating part by means of a suitable pin or bolt.
The CV2 range is available in metric thread sizes from M6 to M20, with corresponding cross-hole diameters and dimensional configurations. It provides a compact connection solution for applications requiring a clevis with a male-threaded mounting connection.
CV2 Clevis with Male Thread – Dimensions and Variants
The CV2 series is available in a range of metric thread sizes, cross-hole diameters and overall dimensions, allowing the clevis to be matched to different mechanical connection and installation requirements.
The dimensional table below provides the key specifications for each CV2 size, including the male thread, cross-hole diameter and installation dimensions. The corresponding technical drawing shows the dimensional references used in the table.
| Code |
Drawing |
d |
g |
a1/a2 |
b |
Thread (m) |
l1 |
l2 |
l3 |
|
|---|---|---|---|---|---|---|---|---|---|---|
| CV201 |
6 |
12 |
12 |
6 |
M6 × 1 |
44 |
37 |
20 |
||
| CV202 |
8 |
16 |
16 |
8 |
M8 × 1.25 |
57 |
47 |
25 |
||
| CV203 |
10 |
20 |
20 |
10 |
M10 × 1.5 |
69 |
57 |
30 |
||
| CV204 |
12 |
24 |
24 |
12 |
M12 × 1.75 |
82 |
68 |
35 |
||
| CV205 |
14 |
28 |
27 |
14 |
M14 × 2 |
94 |
78 |
40 |
||
| CV206 |
16 |
32 |
32 |
16 |
M16 × 2 |
108 |
89 |
45 |
||
| CV207 |
20 |
40 |
40 |
20 |
M20 × 2.5 |
134 |
109 |
55 |
||
All dimensions in mm.
Materials and Available Versions
CV2 clevises are manufactured in standard steel versions and can also be produced from stainless steel AISI 303, AISI 304 or AISI 316, depending on the application requirements.
As a manufacturer, MK can also evaluate special dimensions, thread configurations and material options for applications that cannot be covered by the standard CV2 range.
Need Help Selecting the Right CV2 Clevis?
If you are unsure which CV2 clevis size is suitable for your application, send us the required male thread size, cross-hole diameter, installation dimensions, preferred material and quantity.
Our team can help you select a suitable CV2 version or evaluate a special dimensional, thread or material configuration based on your technical requirements.